18
Version 1.20 Addendum
Once you have set up your track markers, you can proceed to the CD-R page. Set the parameters as
follows:
NOTE: Write speed should be set SLOW or FAST as appropriate for your particular CD writer.
Assuming you have a blank CD-R inserted in the drive, press WRITE. You will be asked if you want to
proceed to which you should respond as appropriately. If you choose to proceed, you will see a progress
display as the audio CD is created. At the end, you will have an audio CD complete with track markers to
play in any audio CD player.
The advantages of DISK-AT-ONCE are that you can create your own playlist and specify the gaps between
the various tracks and also where the track markers and indexes will be placed. Plus, of course, you can
just let the thing run and create your final CD in one pass.
MIDI CONTROLLERS / SCENES
Version 1.20 allows you to assign MIDI controllers to the User Bank channels and store these assignments
as part of a Mix Scene. In this way, each scene can have its own unique combination of assignments
thereby increasing the flexibility of external MIDI control.
To Next Page
Loading...
