Q&A
Q1: What should you do if the camera does not turn on?
A1: 1. Take battery out of the camera.
2. Charge the camera with another working USB cable to check if you can see
the icon AKASO on the screen.
3. Check if you can hear any boot-up sound when you turn on the camera.
4. If you can turn on the camera, please save your pictures and videos and
then go to camera Settings to reset the camera.
Q2: What should you do if the camera is stuck in the Logo interface?
A2: 1. Remove the battery & SD card, and plug the camera with a 5V 2A adapter.
2. Press the Power button for 3 second to turn on the camera, and check if it
works normally.
Q3: What should you do if you can't connect the camera Wifi?
A3: 1. Make sure you follow all the connection instructions to connect the
camera Wifi.
EN
01 02 03 04 05
06 07 08 09 10 11 12 13
14 15 16 17 18 19 20
21 22 23 24 25 26 27
28 29 30 31 32 33 34 35
36 37 38
39 40
To Next Page
