To Next Page
S
Stephanie WestAug 8, 2025
Why is my AKDY 668IS2 fan not working?
- KKelly TurnerAug 8, 2025
There are a couple of reasons why the fan in your AKDY Ventilation Hood might not be working. It could be due to a malfunctioning electronic control caused by over voltage, in which case you should replace the control and user interface. Alternatively, the motor connector may have become loose during cleaning, causing a false contact in the main harness. To fix this, remove power supply from the hood, open the control box, and check that the connector from the motor is securely connected to the connector on the plastic, ensuring the locking system is engaged. If not, press the main connectors attached to the white plastic and push the motor/lamp connectors inward until the locking system is properly attached. Then, reconnect the hood to the power supply and test it.
General
