4
INSTALLATION REQUIREMENT
TOOLS AND PARTS
REQUIREMENTS
Electrical drill or ratchet driver
1/2” drill bit for drilling pilot holes
1 ¼” drill bit for drilling electrical wiring access
hole.
Screwdrivers: Philips & Straight blade
Pliers
Tape measure or ruler and pencil
Electrical supplies for wiring
Aluminum foils tape and/or duct tape
Hammer
Jigsaw or saber saw
Stud finder
Parts Supplied
Body 1 Pc
Chimney mounting bracket 1 Pc
Installation manual 1 Set
Chimney Cover 1 Set
Metal grease filter 1-4 Pcs
Air outlet 1 Set
Exhaust pipe 1 Pc
Hardware 1 Set
To Next Page
Loading...
