EasyManuals Logo

Åkerströms JUPITER 100J User Manual

Åkerströms JUPITER 100J
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
Operating Manual JUPITER 100J & 150J 8 (28)
JUPITER 800/900 100J & 150J Document-ID: 948681-000
Version: A2 Author: SH
EN
TRANSMITTER & MAIN CONTACTOR OFF
Depress the STOP button which switches off the transmitter. At the same time
the main contactor in the receiver is deactivated (the main contactor of the
crane gets de-energised). The status indicator light goes out.
INDICATIONS
If the transmitter during start up or operation detect a fault in any of the trans-
mitters self-tests the status indicator will indicate continuously red light, after
that the transmitter will shut down. If one of the joysticks has a fault during
start up it indicates a continuous yellow light.
INDICATIONS EXPLANATIONS
Greenslowashing Operating ok
Yellowfastashing Battery voltage low <6,9 V
Yellow continuous Discharge battery voltage <6,1 V
Red continuous Hardware fault

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Åkerströms JUPITER 100J and is the answer not in the manual?

Åkerströms JUPITER 100J Specifications

General IconGeneral
BrandÅkerströms
ModelJUPITER 100J
CategoryRemote Control
LanguageEnglish

Related product manuals