AKG DMS Tetrad User Manual

DMSTetrad
USER INSTRUCTIONS
............................
2
Please read the manual before using the equipment!
BEDIENUNGSANLEITUNG .................... 22
Bitte vor Inbetriebnahme des Gerätes lesen!
MODE D’EMPLOI ................................. 42
Veuillez lire cette notice avant d’utiliser le système!
MODO DE EMPLEO.............................. 62
¡Sirvase leer el manual antes de utilizar el equipo!

AKG DMS Tetrad Specifications

General

Brand	AKG
Model	DMS Tetrad
Category	Microphone system
Language	English

Summary

Safety and the Environment

Safety Precautions

Essential safety guidelines for using the equipment and preventing damage or injury.

Product Description

Scope of Delivery

Lists the items included in the DMSTetrad Performer Set, Vocal Set P5, and Vocal Set D5.

Front Panel Controls

ON/OFF Button

Controls the power for the receiver and the entire DMSTetrad system.

Volume Potentiometer

Adjusts the audio output level for each channel and influences the sum output.

CONNECT Button Functions

Used for checking transmitter assignment and registering transmitters.

Rear Panel Connections

Interference Protection Switch

Adjusts internal interference protection against 2.4 GHz devices.

Balanced Channel Outputs

Provides balanced audio output for each of the four channels via XLR.

Sum Output Level Control

Allows regulation of the combined audio signal level by +20 dB.

Mixed Output (Sum) Connection

Provides a balanced audio output of the combined signal of all four channels.

DHTTetrad D5 Handheld Transmitter

DHTTetrad D5 Transmitter Controls

Explains the functions of the status LED, battery cover, ON/OFF, and connect buttons.

Input Gain Adjustment

Adjusts the audio input sensitivity to match the microphone or instrument.

DPTTetrad Bodypack Transmitter

DPTTetrad Bodypack Transmitter Controls

Explains the status LED, ON/OFF button, connect button, audio input, and cover.

Bodypack GAIN Control

Matches the transmitter input gain to the connected microphone or instrument.

Installation and Connection

Attaching Antennas

Instructions for attaching antennas to the rear and front panels of the receiver.

Rack Mounting the Receiver

Connecting the Receiver

Connecting to Mains Power

Steps for connecting the AC adapter, verifying voltage, and using strain relief.

Connecting Audio Outputs

Setting Up the System

Setting Up the Receiver

Handheld Transmitter Battery Setup

Pocket Transmitter Battery Setup

System Configuration

Assigning Channels

Procedure for assigning a transmitter to a free channel or changing an existing channel.

Registering New Transmitters

Steps for registering a new transmitter onto the receiver, including confirmation.

Transmitter Operation

Connecting an Instrument to Bodypack

Adjusting Receiver Audio Level

Internal Interference Protection Adjustment

Setting the INTERFERENCE PROTECTION switch based on environment conditions.

Microphone Technique

Handheld Transmitter Microphone Technique

Feedback Prevention

Explains feedback causes and how the supercardioid pattern and speaker placement help avoid it.

Troubleshooting Guide

Troubleshooting: No Radio Contact

Addresses issues with flashing green status LED, indicating no radio contact or unregistered transmitter.

Troubleshooting: No Sound Issues

Troubleshooting: Noise and Interference

Addresses noise, crackling, and unwanted signals from interference or antenna issues.

Troubleshooting: Distortion

Technical Data

DHTTetrad D5 Technical Specifications

DHTTetrad P5 Technical Specifications

DSRTetrad Receiver Technical Specifications

DPTTetrad Bodypack Transmitter Technical Specifications