4
microphone near transmitter stations and along
with wireless microphones or other communi-
cations equipment. The extremely rugged,
heavy body and sturdy front grill protect the
microphone from damage from tough handling
on stage.
• High headroom, minimum distortion:
Capable of handling sound pressure levels up
to 150 dB (PERCEPTION 120) or 155 dB (PER-
CEPTION 220) without introducing perceptible
distortion and built to resist high temperatures
and humidity, the microphone will give excellent
results in a wide range of applications.
• Bass cut filter: Selector 1 on the microphone
front (refer to fig. 1) further reduces low-end
distortion caused by footfall or wind noise, etc.
The filter also minimizes the proximity effect
that close-in miking from less than 4 inches
causes in any unidirectional microphone. The
filter rolls off at 12 dB/octave from 300 Hz
downward.
• Switchable preattenuation pad: Selector 2
on the microphone front (refer to fig. 1) lets you
increase the headroom by 20 dB for distortion-
free close-in recording. The preattenuation pad
prevents the microphone's output level, partic-
ularly at low frequencies, from overloading the
miniature transformers used in many mixer
input stages, etc.
2.3 Optional Accessories
• PF 80 studio pop screen
• ST 305 floor stand
• W 4000 external windcscreen
Fig. 1: Bass cut and preattenuation switches on
microphone
front.
1 2
AKG PERCEPTION 120/220
To Next Page
Loading...
