Akuvox R20A Quick Guide

B
2.Without an electrical juncon box in the wall
R20A
Wall-mounng Installaon
A
Mark four screw holes through the wall-mounting bracket on the wall.
Use a 6 mm hand drill to drill the four holes with a depth of 25 mm.
C
Insert four plastic wall anchors into the holes.
D
Fix the wall-mounting bracket with four ST4x20 crosshead screws.
60
56
60
6

Akuvox R20A Specifications

General

Audio	Built-in Microphone and Speaker
Installation	Wall-mounted
Ingress Protection	IP65
Card Reader	13.56MHz, Mifare
RS485	Yes
Camera	2MP
Network	10/100Mbps Ethernet
Protocols	SIP
Power	PoE or 12V DC
PoE	IEEE 802.3af
Relays	1
Input	2