EasyManua.ls Logo

AL-KO CS 4030 - Operator; Operating Times; Working with the Chain Saw

AL-KO CS 4030
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
469861_c 35
Safety information when working
If you are working with a chain saw for the
first time:
Have the salesperson or another expert
explain the operation of the chain saw, or
attend a course.
Prior to the first use, at the very least
practice cutting round wood on a saw
frame or stand.
10.1 Operator
Young people under 16 years of age and
people who do not know the operating in-
structions are not allowed to use the tool.
To operate the chain saw, you must be rest-
ed and in good physical and mental health. If
you must not exert yourself for health rea-
sons, ask your doctor whether it is possible to
work with a chain saw.
10.2 Operating times
Heed the country-specific regulations for the op-
erating times of chain saws. The operating times
of chain saws can be limited by national and local
regulations.
10.3 Working with the chain saw
WARNING! Danger of serious injury. If an
incompletely mounted chain saw is used, serious
injury can be caused.
Only use the chain saw when it has been ful-
ly mounted.
Before each use, perform a visual inspection
in order to check that the chain saw is com-
plete and does not contain damaged or worn
components. Safety and protective devices
must be intact.
WARNING! Risk of injury due to chain
saw being started inadvertently. A chain saw
that is started inadvertently can lead to serious
injury. Therefore, remove the rechargeable bat-
tery during:
Testing, adjustment work and cleaning work
Work on the cutting equipment
Leaving the chain saw
Transport
Storage
Maintenance and repair work
Danger
Never work alone.
Always keep a first-aid kit to hand in case of
accidents.
Avoid touching metal objects in the ground or
which are conductively connected to the
ground.
The personal protective equipment compris-
es:
Protective helmet
Hearing protection (e.g. ear defenders,
especially when working for than 2.5
hours a day)
Protective glasses or face visor incorpo-
rated in the protective helmet
Protective trousers with cut protection in-
lay
Sturdy working gloves
Safety boots with high-grip sole and steel
toe caps
Do not use the chain saw above shoulder
height, since safe handling is no longer pos-
sible in this way.
When changing position, switch off the en-
gine and put on the chain guard.
When chain saws are not in use, always put
on the chain guard and remove the recharge-
able battery.
Switch the chain saw off before putting it
down.
Do not use the chain saw for levering or mov-
ing wood.
Only specialist personnel are allowed to saw
trunks that are thicker than the length of the
chain bar.
Only start the cut once the saw chain is run-
ning, never switch on the chain saw already
in the kerf.
Make sure that no saw chain oil gets onto the
ground.
Do not undertake sawing work in the rain,
snow or stormy weather.
Never disable safety and protective devices.

Table of Contents

Other manuals for AL-KO CS 4030

Related product manuals