Button light guide
Operational States
Mode Description Button LED behavior
Standby or off
The camera is in standby mode
(normal operation) or the battery is
drained and requires recharging.
Off
Local connection
The camera has a local network
connection.
Solid green
No local connection
The camera does not have a local
network connection.
Solid red
Low battery
The camera's battery is low and
requires a recharge.
Alternating red and blue
Connecting to network
The camera is powered on and
connecting to the network.
Blinking red
WPS mode
The camera is in WPS pairing mode.
To enter this mode, press and hold
the button for 30-45 seconds.
Blinking blue
AP mode
The camera is in AP pairing mode.
To enter this mode, press and hold
the button for 46-60 seconds.
Blinking white
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_Wireless_Video_Doorbell_(A…
Updated: Wed, 08 Mar 2023 14:28:25 GMT
16
To Next Page
Loading...
Need help?
General
