Mode description Top LED Behavior Button LED behavior
Fully charged
The battery pack is fully charged.
Solid green On button press, solid green
Failure charging
The battery pack stopped charging
because the device was plugged in
too long. This may signal that there
is an issue with your battery pack.
Remove the charging cabled and re-
attempt charging after an hour. If you
see the same behavior, please
contact your provider.
Alternating orange and green Alternating red and white
Operational temperature range for
charging exceeded
The battery pack's internal
temperature is either too hot or too
cold. Please charge the battery pack
in a room-temperature environment.
Solid green or solid orange
Alternating red and yellow
or
Alternating red and white
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_Wireless_Video_Doorbell_(A…
Updated: Wed, 08 Mar 2023 14:28:25 GMT
18
To Previous Page
Loading...
Need help?
General
