Alarm Lock DL5200 - User Manual

1
CONGRATULATIONS!
Your new Alarm Lock Trilogy electronic digital lock is a rugged
double-sided entry lock of advanced design with several program-
mable features. Three security levels are provided: Master (can
perform ALL functions), Manager (can perform MOST functions
plus entry), and Basic User (entry only).
The lock includes 100 User Codes (consisting of Managers and
Basic Users), plus three "one-time entry" Service Codes. The
Manager/Basic User Codes are organized similar to a grid--ten
banks of ten Access Codes.
Take the time to read through this guide to familiarize
yourself with the features and operations of the lock, and
its quick and easy programming procedures.
FEATURES
• 1 Master Code (all functions including entry)
• 10 Manager Codes (perform SOME programming
functions plus entry)
• 90 Basic User Access Codes (Entry Only)
• 3 Service Codes ("One-Time Entry" Codes)
• Two User Disable Modes:
• All User Codes Disabled Except Master Code
• All User Codes in a Bank Disabled Except Manager
Codes
• 30-Second Keypad Anti-Tamper Lockout
(Keypad Lockout After 3 Unsuccessful User Code
Entries)
• Programmable Relay Functions
(Relay may be keypad programmed to energize on any
keypress 0-9 or on unlock).
• Locks may be pre-programmed prior to installation.
Once installed, locks may immediately be put into use.
• Clearing all user codes only requires a simple two step
procedure (see "Erase All Programming" on page 11).
Trilogy
DL5200 Programming
Instructions
OI345 10/08
© ALARM LOCK 2008
345 Bayview Avenue
Amityville, New York 11701
For Sales and Repairs 1-800-ALA-LOCK
For Technical Service 1-800-645-9440
© ALARM LOCK 2008
QUICK LOOKUP
Wiring ............................................................... 2
Quick Start ...................................................... 2
Testing Codes .................................................. 3
Manager & User Location Worksheet .............. 4
Manager & User Location Example ................ 5
Programming Worksheet: Functions ............... 6
Change Existing Master Code ...................... 7
Add/Change Manager Codes ....................... 7
Add/Change User Codes ............................. 7
Deleting Codes ............................................. 7
Disable/Enable Users ................................... 7
Disable/Enable All ........................................ 8
Code Location Function ............................... 8
Next Free Code Address Locator ................. 8
Add/Delete Service Codes .......................... 9
Enable/Disable Passage Mode .................... 9
Pass Time ("Door Unlock") ........................... 9
Disable/Enable Groups ................................ 9
Disable/Enable Users in Bank .................... 10
Keypress Sound Options ............................ 10
Audible and LED Indications .......................... 11
Battery Replacement ..................................... 11
Erase All Programming .................................. 11
Limited Warranty ............................................ 12
DL5200
PRIMARY SIDE
DL5200
SECONDARY SIDE

Summary

Wiring

Quick Start Procedures

First Time Start Up

Initial setup for the lock, including unpacking and battery connection.

Change Factory Master Code

Procedure to set a new, secure Master Code for the lock.

Enter Manager Codes

Instructions for adding or changing Manager access codes.

Enter Basic User Access Codes

Guide for adding or modifying Basic User access codes.

Delete User Access Codes

Process to remove existing User access codes from the lock.

Testing Lock Codes

Manager and User Location Worksheet

Manager and User Location Example

Programming Functions Overview

Core Code Management Functions

Includes changing master, adding/deleting manager and user codes.

User Status and Group Control

Managing user enablement, disabling all users, and group permissions.

Service Codes and Passage Modes

Programming one-time service codes, passage mode, and pass time.

Location Finding and Sound Options

Functions for locating codes and configuring keypad sound feedback.

Programming Functions Details

Change Master Code

Detailed steps to modify the existing Master Code.

Add or Change Manager Codes

Procedure for adding new or altering existing Manager codes.

Add or Change User Codes

Steps to add new or modify existing User access codes.

Delete Manager and User Codes

Instructions for removing Manager and User access codes.

Disable or Enable Users

How to disable or enable individual users by bank or number.

Advanced Programming Functions

Enable or Disable All Users

Functions to disable or enable all users and service codes.

Code Location Function

Finds the location (bank/user) of a specific code entered.

Next Free Code Address Locator

Identifies the next available location for programming a new code.

Service Code and Mode Management

Add or Delete Service Codes

Procedure for managing one-time entry Service Codes.

Enable or Disable Passage Mode

Controls the lock's ability to allow passage without a code.

Set Pass Time

Adjusts the duration the lock remains unlocked after code entry.

Disable or Enable Groups

Manages whether managers are restricted to their own banks.

Bank User Control and Keypress Sounds

Disable or Enable Users in Bank

Disables or enables all users within a specific bank.

Keypress Sound Options

Configures keypad feedback sounds and LED indicators.

Audible and LED Indications

Battery Replacement Procedure

Erase All Programming

Alarm Lock Limited Warranty

Alarm Lock DL5200 Specifications

General

Model	DL5200
Category	Door locks
Audit Trail	Yes
Door Thickness	1-3/4" to 2-1/4"
Backset	2-3/4" or 2-3/8"
Material	Metal
Lock Type	Deadbolt
Voltage	6V
Key Override	Yes
Backlight	Yes
Finish	Satin Nickel
Access Method	Keypad
Programming	Keypad
Power	Battery Powered
Weather Resistance	Weather-resistant
Battery Type	4 AA Batteries
Battery Life	Approximately 1 year