35
ALL FUNCTIONS IN DETAIL
1. Pairing the e-motion wheels
- Switch on both e-motion wheels using the on/off button of the
respective wheel.
- Switch on the ECS remote control via the on/off button [1].
- If the ECS remote control has never been connected to e-motion
wheels before, the link symbol ashes in the LCD [2].
- The Bluetooth symbol
also ashes in the LCD of the ECS
remote control [2].
- If you want to connect a new e-motion wheel pair with the ECS
remote control, switch on the ECS remote control and press the
pairing button [5] on the back of the ECS remote control for at least
3 seconds with a narrow but not pointed object (e.g., ballpoint pen).
The link symbol X now also appears in the LCD [2].
- As soon as an e-motion wheel has been found by the ECS remote
control, the LED display of the wheel ashes and an acoustic signal
can be heard.
To Next Page
Loading...