47
CHANGING BATTERIES
- Loosen the screws on the back of the ECS remote control
with the supplied tool and remove the cover [8].
- Replace the old batteries with 2 new ones of the same type
(AAA). Observe the polarity when inserting the batteries.
- Replace the cover [8] in the recess provided in the ECS remote
control and tighten the screws again using the supplied tool.
Note:
- Please do not use rechargeable batteries for the ECS remote
control.
- The manufacturer and quality of the batteries can inuence the
service life of the batteries.
- The pairing of the e-motion wheels is not lost when the batteries
are replaced.
To Next Page
Loading...