Alber E-Motion ECS - Resetting the e-motion wheels

36
ALL FUNCTIONS IN DETAIL
- Actuate the on/off button of the corresponding e-motion wheel.
- The LED of the other e-motion wheel now ashes and an acoustic
signal is also heard.
- Now actuate the on/off button of this wheel.
- The link symbol in the LCD of the ECS remote control [2] goes out.
- The ashing Bluetooth symbol in the LCD of the ECS remote
control [2] is now displayed continuously.
- The pairing process has been successfully completed. The ECS
remote control can now be used.
2. Resetting the e-motion wheels
- Switch on both e-motion wheels via the on/off button of the ECS
remote control.
- Wait until the e-motion wheels are connected with the ECS
remote control and the Bluetooth symbol is continuously
displayed in the LCD of the ECS remote control [2].