39
3. Switching on the e-motion wheels
- Switch on the ECS remote control via the on/off button [1].
- The ECS remote control connects with the e-motion wheels.
During this process, which can last several seconds, the Bluetooth
symbol ashes in the LCD of the ECS remote control [2].
- Both e-motion wheels are switched on.
- Afterwards, the current charging state of the e-motion batteries
is shown in 20% steps .
- The last set assistance level (1 or 2) is displayed.
- The e-motion is now operational.
Note:
- To be able to switch the e-motion wheels on or off with the
ECS remote control, they must have been previously switched
on once via the on/off switch of the respective wheel.
To Next Page
Loading...