42
5. Learning mode
- In addition to the two assistance levels described in chapter 4,
a learning mode is available via the ECS remote control. This
gently introduces you to the operation of the e-motion by means
of a particularly smooth driving behaviour.
- To activate the learning mode, actuate the button for selecting
the assistance level [3] for at least three seconds.
- The symbol of the learning mode ashes in the LCD [2] until
the mode has been activated and acknowledged in both wheels.
The symbol is then permanently shown in the LCD.
- The learning mode can now be used.
- To deactivate the learning mode, press the button for selecting
the assistance level [3] for at least three seconds.
- The symbol of assistance level 1 now ashes in the LCD until
the mode has been activated and acknowledged in both wheels.
ALL FUNCTIONS IN DETAIL
To Next Page
Loading...