40
- If the e-motion wheels are switched off via the ECS remote con-
trol, they are in standby mode: From this time on, it is possible
to activate the wheels via the ECS remote control for 72 hours.
The e-motion wheels then switch off completely to protect the
batteries of the wheels. The wheels can then only be switched
on by pressing the on/off button on the respective wheel.
4. Changing the assistance level
- With the ECS remote control, you have two different assistance
levels available.
- When the ECS remote control is switched on and connected to
the e-motion wheels, it shows the respectively activated
assistance level 1 or 2.
- To change the assistance level, actuate the button for selecting
the assistance level [3].
- The symbol of the newly selected assistance level ashes in
ALL FUNCTIONS IN DETAIL
To Next Page
Loading...