44
back in freewheel mode a few seconds later.
- When the push rims are driven (forward or backward) during the
above-mentioned 5 seconds, the brake function is immediately
released and the journey can be continued.
- To switch on the rollback delay, press the button to select the
additional drive function [4].
- The symbol for the rollback delay ashes in the LCD [2] until
the mode has been activated and acknowledged in both wheels.
The symbol is then permanently shown in the LCD.
- The rollback delay is now switched on.
- To switch off the rollback delay, press the button to select the
additional drive function [4] again.
- The symbol now ashes in the LCD [2] until the mode has been
deactivated and acknowledged in both wheels. The symbol is
then no longer shown in the LCD [2].
ALL FUNCTIONS IN DETAIL
To Next Page
Loading...