845
Using the Alber anti-tippers
• Press your foot on an anti-tipper as shown in the diagram.
• While doing so, pull the wheelchair upwards and to the rear a little by its handles
until the wheelchair has been raised and the anti-tippers click into a fixed position.
• You can now fit or remove a wheel. Esprit wheels must be switched off prior to fitting
and removal.
• Repeat the process with the second anti-tipper on the other side of the wheelchair.
• Once the wheels are fitted, you can return the anti-tippers to their starting position.
To do this, push the wheelchair forwards and push back the holding rod [95] using
your foot at the same time.
To Next Page
Loading...
