User manual
8AL91434ENABed01 68 /113
Remove network
• Select the network to remove.
• Remove
• Validate.
Check connection
• Select the network to check.
• Check
• Validate to check the connection. The new state is displayed.
• The phone will reboot automatically after checking the connection.
3.2.5 Enable the WLAN / Disable the WLAN
You can simply enable/disable the WLAN by connecting/disconnecting the desk phone to Ethernet.
You can also manually disable the WLAN as follows:
• Access to the administration menu of the desk phone.
• Network
o Wireless Network Wireless network
o Enable WLAN: press repeatedly until you set the value: OFF (depending on the system
configuration, an administrator password is requested to access this menu).
o Validate.
To Next Page
Loading...