Alcatel-Lucent 300 DECT - Sending DTMF Signals; Sending a Calibrated Cut-Off; Programming Your Personal Directory

Using the telephone in GAP mode
8
42
8.5
Sending DTMF signals
During a call, you sometimes have to send DTMF signals, for example, for a voice message service,
an automatic switchboard or when remotely consulting an answering machine. To do this:
Press the star key (hold down for a few seconds). ( star :)
8.6
Sending a calibrated cut-off
The calibrated cut-off activates functions such as transfer to another telephone set.
To make a calibrated cut-off:
Press the 0 key (hold down for a few seconds).
8.7
Programming your personal directory
Your directory can contain up to 12 numbers
select the 'directories' function select the chosen card
apply apply enter the name (10 characters
maximum)
apply enter the number apply return to idle
To key in the name : the keys in the numeric keypad include letters
that you can display by pressing them successively. Example: press
twice in succession on 8 to display the letter 'U'.
To insert a pause in a number, press the 1 (hold down for a few
seconds).
To insert a measured break, press 0 (hold down for a few seconds).
123
123
1-............
2-............
3-............
123
1-Edit
2-Delete
3-Call
123
Name?
MARTIN
123
Number?
0123456789