Alcatel-Lucent 7210 SAS - Page 120

Show Commands
Page 120 7210 SAS D, E OS Router Configuration Guide
Sample Output
A:ALA-49>config>filter# show filter ip 3
===============================================================================
IP Filter
===============================================================================
Filter Id : 3 Applied : Yes
Scope : Template Def. Action : Drop
Entries : 1
-------------------------------------------------------------------------------
Filter Match Criteria : IP
-------------------------------------------------------------------------------
Entry : 10
Src. IP : 10.1.1.1/24 Src. Port : None
Dest. IP : 0.0.0.0/0 Dest. Port : None
Protocol : 2 Dscp : Undefined
ICMP Type : Undefined ICMP Code : Undefined
TCP-syn : Off TCP-ack : Off
Match action : Drop
Ing. Matches : 0 Egr. Matches : 0
===============================================================================
A:ALA-49>config>filter#
*A:Dut-C>config>filter# show filter ip fSpec-1 associations
===============================================================================
Forward — The explicit action to perform is forwarding of the
packet.
Ing. Matches
The number of ingress filter matches/hits for the filter entry.
Src. Port
The source TCP or UDP port number.
Dest. Port
The destination TCP or UDP port numbere.
Dscp
The DiffServ Code Point (DSCP) name.
ICMP Code
The ICMP code field in the ICMP header of an IP packet.
Option-present
Off —
Specifies not to search for packets that contain the option field
or have an option field of zero.
On — Matches packets that contain the option field or have an option
field of zero be used as IP filter match criteria.
TCP-ack
False —
Configures a match on packets with the ACK flag set to
false.
True — Configurs a match on packets with the ACK flag set to true.
Off — The state of the TCP ACK flag is not considered as part of the
match criteria. as part of the match criteria.
Egr. Matches
The number of egress filter matches/hits for the filter entry.
Label Description (Continued)