Alcatel-Lucent 7210 SAS - Page 123

Filter Policies
7210 SAS D, E OS Router Configuration Guide Page 123
Output Show Filter Associations — The following table describes the fields that display when the
associations keyword is specified.
Sample Output
A:ALA-49# show filter ip 1 associations
===============================================================================
IP Filter
===============================================================================
Filter Id : 1 Applied : Yes
Scope : Template Def. Action : Drop
Entries : 1
-------------------------------------------------------------------------------
Filter Association : IP
-------------------------------------------------------------------------------
Service Id : 1001 Type : VPLS
- SAP 1/1/1:1001 (Ingress)
Service Id : 2000 Type :
- SAP 1/1/1:2000 (Ingress)
===============================================================================
A:ALA-49#
Label Description
Filter Id
The IP filter policy ID.
Scope Template — The filter policy is of type Template.
Exclusive — The filter policy is of type Exclusive.
Entries
The number of entries configured in this filter ID.
Applied No — The filter policy ID has not been applied.
Yes — The filter policy ID is applied.
Def. Action Forward — The default action for the filter ID for packets that do not
match the filter entries is to forward.
Drop — The default action for the filter ID for packets that do not
match the filter entries is to drop.
Service Id
The service ID on which the filter policy ID is applied.
SAP
The Service Access Point on which the filter policy ID is applied.
(Ingress)
The filter policy ID is applied as an ingress filter policy on the inter-
face.
(Egress)
The filter policy ID is applied as an egress filter policy on the interface.
Type
The type of service of the service ID.