Show Commands
Page 124 7210 SAS D, E OS Router Configuration Guide
Output Show Filter Associations (with TOD-suite specified) — If a filter is referred to in a TOD
Suite assignment, it is displayed in the show filter associations command output:
A:ALA-49# show filter ip 160 associations
===============================================================================
IP Filter
===============================================================================
Filter Id : 160 Applied : No
Scope : Template Def. Action : Drop
Entries : 0
-------------------------------------------------------------------------------
Filter Association : IP
-------------------------------------------------------------------------------
Tod-suite "english_suite"
- ingress, time-range "day" (priority 5)
===============================================================================
A:ALA-49#
Output Show Filter Counters — The following table describes the output fields when the counters
keyword is specified..
Label Description
IP Filter
Filter Id
The IP filter policy ID.
Scope Template — The filter policy is of type Template.
Exclusive — The filter policy is of type Exclusive.
Applied No — The filter policy ID has not been applied.
Yes — The filter policy ID is applied.
Def. Action Forward — The default action for the filter ID for packets that do not
match the filter entries is to forward.
Drop — The default action for the filter ID for packets that do not
match the filter entries is to drop.
Filter Match
Criteria
IP — Indicates the filter is an IP filter policy.
Entry
The filter ID filter entry ID. If the filter entry ID indicates the entry is
(Inactive), then the filter entry is incomplete as no action has been
specified.
Ing. Matches
The number of ingress filter matches/hits for the filter entry.
Egr. Matches
The number of egress filter matches/hits for the filter entry.
Note that egress counters count the packets without Layer 2 encapsula-
tion. Ingress counters count the packets with Layer 2 encapsulation.
To Next Page
Loading...
