Alcatel-Lucent 7210 SAS - Page 125

Filter Policies
7210 SAS D, E OS Router Configuration Guide Page 125
mac
Syntax mac [mac-filter-id [associations | counters] [entry entry-id]]
Context show>filter
Description This command displays MAC filter information.
Parameters mac-filter-id — Displays detailed information for the specified filter ID and its filter entries.
Values 1— 65535
associations — Appends information as to where the filter policy ID is applied to the detailed filter
policy ID output.
counters — Displays counter information for the specified filter ID.
entry entry-id — Displays information on the specified filter entry ID for the specified filter ID only.
Values 1 — 65535
Output No Parameters Specified — When no parameters are specified, a brief listing of IP filters is
produced. The following table describes the command output for the command.
Filter ID Specified — When the filter ID is specified, detailed filter information for the filter ID
and its entries is produced. The following table describes the command output for the command.
Label Description
Filter Id
The IP filter ID
Scope Template — The filter policy is of type Template.
Exclusiv — The filter policy is of type Exclusive.
Applied No — The filter policy ID has not been applied.
Yes — The filter policy ID is applied.
Description
The MAC filter policy description.
Label Description
MAC Filter
Filter Id
The MAC filter policy ID.
Scope Template — The filter policy is of type Template.
Exclusiv — The filter policy is of type Exclusive.
Description
The IP filter policy description.
Applied No — The filter policy ID has not been applied.
Yes — The filter policy ID is applied.