Alcatel-Lucent 7210 SAS - Page 127

Filter Policies
7210 SAS D, E OS Router Configuration Guide Page 127
Description : Not Available
Src Mac : 00:00:5a:00:00:00 ff:ff:ff:00:00:00
Dest Mac : 00:00:00:00:00:00 00:00:00:00:00:00
Dot1p : Undefined Ethertype : 802.2SNAP
Match action : Forward
Ing. Matches : 0 Egr. Matches : 0
Entry : 300 (Inactive) FrameType : Ethernet
Description : Not Available
Src Mac : 00:00:00:00:00:00 00:00:00:00:00:00
Dest Mac : 00:00:00:00:00:00 00:00:00:00:00:00
Dot1p : Undefined Ethertype : Ethernet
Match action : Default
Ing. Matches : 0 Egr. Matches : 0
===============================================================================
Filter Associations — The associations for a filter ID will be displayed if the associations
keyword is specified. The assocation information is appended to the filter information. The following
table describes the fields in the appended associations output.
Sample Output
A:ALA-49# show filter mac 3 associations
===============================================================================
Mac Filter
===============================================================================
Filter ID : 3 Applied : Yes
Scope : Template Def. Action : Drop
Entries : 1
-------------------------------------------------------------------------------
Filter Association : Mac
-------------------------------------------------------------------------------
Service Id: 1001 Type : VPLS
- SAP 1/1/1:1001 (Egress)
===============================================================================
A:ALA-49#
Label Description
Filter Associa-
tion
Mac — The filter associations displayed are for a MAC filter policy
ID.
Service Id
The service ID on which the filter policy ID is applied.
SAP
The Service Access Point on which the filter policy ID is applied.
Type
The type of service of the Service ID.
(Ingress)
The filter policy ID is applied as an ingress filter policy on the inter-
face.
(Egress)
The filter policy ID is applied as an egress filter policy on the interface.