Alcatel-Lucent 7210 SAS - Page 128

Show Commands
Page 128 7210 SAS D, E OS Router Configuration Guide
Filter Entry Counters Output — When the counters keyword is specified, the filter entry output
displays the filter matches/hit information. The following table describes the command output for the
command.
Sample Output
A:ALA-49# show filter mac 8 counters
===============================================================================
Mac Filter
===============================================================================
Filter Id : 8 Applied : Yes
Scope : Template Def. Action : Forward
Entries : 2
Description : Description for Mac Filter Policy id # 8
-------------------------------------------------------------------------------
Filter Match Criteria : Mac
-------------------------------------------------------------------------------
Entry : 8 FrameType : Ethernet
Ing. Matches: 80 pkts
Egr. Matches: 62 pkts
Entry : 10 FrameType : Ethernet
Ing. Matches: 80 pkts
Egr. Matches: 80 pkts
Label Description
Mac Filter
Filter Id
The MAC filter policy ID.
Scope Template — The filter policy is of type Template.
Exclusive — The filter policy is of type Exclusive.
Description
The MAC filter policy description.
Applied No — The filter policy ID has not been applied.
Yes — The filter policy ID is applied.
Def. Action Forward — The default action for the filter ID for packets that do not
match the filter entries is to forward.
Drop — The default action for the filter ID for packets that do not
match the filter entries is to drop.
Filter Match
Criteria
Mac — Indicates the filter is an MAC filter policy.
Entry
The filter ID filter entry ID. If the filter entry ID indicates the entry is
(Inactive), then the filter entry is incomplete as no action has been
specified.
Ing. Matches
The number of ingress filter matches/hits for the filter entry.
Egr. Matches
The number of egress filter matches/hits for the filter entry.