Alcatel-Lucent 7210 SAS - Page 43

IP Router Configuration
7210 SAS D, E OS Router Configuration Guide Page 43
Show Commands
arp
Syntax arp [ip-int-name | ip-address/mask | mac ieee-mac-address | summary] [local | dynamic |
static]
Context show>router
Description This command displays the router ARP table sorted by IP address. If no command line options are spec-
ified, all ARP entries are displayed.
Parameters ip-address/mask — Only displays ARP entries associated with the specified IP address and mask.
ip-int-name — Only displays ARP entries associated with the specified IP interface name.
mac ieee-mac-addr — Only displays ARP entries associated with the specified MAC address.
summary — Displays an abbreviate list of ARP entries.
[local | dynamic | static] — Only displays ARP information associated with the keyword.
Output ARP Table Output — The following table describes the ARP table output fields:
Sample Output
*B:7710-Red-RR# show router arp
===============================================================================
ARP Table (Router: Base)
===============================================================================
IP Address MAC Address Expiry Type Interface
Label Description
IP Address
The IP address of the ARP entry.
MAC Address
The MAC address of the ARP entry.
Expiry
The age of the ARP entry.
Type
Dyn — The ARP entry is a dynamic ARP entry.
Inv — The ARP entry is an inactive static ARP entry (invalid).
Oth — The ARP entry is a local or system ARP entry.
Sta — The ARP entry is an active static ARP entry.
Int
The ARP entry is an internal ARP entry.
[I}
The ARP entry is in use.
Interface
The IP interface name associated with the ARP entry.
No. of ARP Entries
The number of ARP entries displayed in the list.