IP Router Configuration
7210 SAS D, E OS Router Configuration Guide Page 45
Sample Output
A:ALU-7210# show router interface
===============================================================================
Interface Table (Router: Base)
===============================================================================
Interface-Name Adm Opr Mode Port/SapId
IP-Address PfxState
-------------------------------------------------------------------------------
system Up Up Network system
72.22.24.169/32 n/a
-------------------------------------------------------------------------------
Interfaces : 1
===============================================================================
A:ALU-7210#
A:ALA-A# show router interface 6.6.6.2
===============================================================================
Interface Table (Router: Base)
===============================================================================
Interface-Name Adm Opr Mode Port/SapId
IP-Address PfxState
-------------------------------------------------------------------------------
to-PE-E Up Up IES 1/1/3:0.*
6.6.6.2/24 n/a
-------------------------------------------------------------------------------
Interfaces : 1
===============================================================================
A:ALA-A#
Detailed IP Interface Output — The following table describes the detailed output fields for an IP
interface.
IP-Address
The IP address and subnet mask length of the IP interface.
n/a — Indicates no IP address has been assigned to the IP interface.
Adm
Down — The IP interface is administratively disabled.
Up — The IP interface is administratively enabled.
Opr
Down — The IP interface is operationally disabled.
Up — The IP interface is operationally disabled.
Mode
Network — The IP interface is a network/core IP interface.
Port
The physical network port associated with the IP interface.
Label Description
If Name
The IP interface name.
Admin State
Down — The IP interface is administratively disabled.
Label Description (Continued)
To Next Page
Loading...
