Alcatel-Lucent 7210 SAS - Page 54

Clear Commands
Page 54 7210 SAS D, E OS Router Configuration Guide
Clear Commands
router
Syntax router
Context clear>router
Description This command clears for a the router instance in which they are entered.
Parameters router-instance — Specify the router name or service ID.
Values service-id:1 — 2147483647
Default Base
arp
Syntax arp {all | ip-addr | interface {ip-int-name | ip-addr}}
Context clear>router
Description This command clears all or specific ARP entries.
The scope of ARP cache entries cleared depends on the command line option(s) specified.
Parameters all — Clears all ARP cache entries.
ip-addr — Clears the ARP cache entry for the specified IP address.
interface ip-int-name — Clears all ARP cache entries for the IP interface with the specified name.
interface ip-addr — Clears all ARP cache entries for the specified IP interface with the specified IP
address.