Alcatel-Lucent 7210 SAS - Page 55

IP Router Configuration
7210 SAS D, E OS Router Configuration Guide Page 55
Debug Commands
router
Syntax router
Context debug
Description This command configures debugging for a router instance.
Parameters router-instance — Specify the router name or service ID.
Values service-id: 1 — 2147483647
Default Base
ip
Syntax ip
Context debug>router
Description This command configures debugging for IP.
arp
Syntax arp
Context debug>router>ip
Description This command configures route table debugging.
icmp
Syntax [no] icmp
Context debug>router>ip
Description This command enables ICMP debugging.