2.15 Sending DTMF signals
During a conversation you sometimes have to send DTMF signals, such as with a voice server, an
automated attendant or a remotely consulted answering machine.
Depending on the system configuration, the DTMF can be activated by default.
If DTMF is not activated by default on your system:
• During a conversation.
• Use one of the following:
o Send DTMF
o Press the star key.
• Enter DTMF code.
The function is automatically cancelled when you hang up.
If DTMF is activated by default on your system:
• During a conversation.
• Enter DTMF code.
If DTMF is activated by default on your system, you have to deactivate DTMF before entering the code
of a feature: Deactivate DTMF (Deact DTMF).
2.16 Mute, so that your contact cannot hear you
You can hear your contact but he/she cannot hear you:
2.16.1 From the set
• During a conversation.
• Disable microphone The mute key blinks .
• Resume the conversation The mute key no longer blinks .
2.16.2 From the Bluetooth® handset (Bluetooth® wireless handset)
• During a conversation.
• Press the handset volume/mute key (long press) The mute key blinks.
• Press the handset volume/mute key (long press) Resume the conversation The mute
key no longer blinks
2.16.3 From the headset
• Use the mute key of the headset, if there is one, to disable headset microphone or to resume the
conversation
2.17 Forwarding calls to your voice message service
• Select the forward icon (the icon depends on your phone: / ).
• Imm fwd to VM (Imm fwd VM) Forward is acknowledged.
•
To Next Page
Loading...
