7.19 Install a jack accessory (headset, hands-free, loudspeaker) (8078s, 8068s,
8058s, 8028s Premium DeskPhone)
Your phone is equipped with a 3.5 mm, 4 pole jack. If your device is not compatible, you can use a 3
pole to 4 pole jack adapter.
By default, the audio jack of your telephone can be used to connect a headset, hands-free kit or
loudspeaker. A wideband headset can also be installed for optimized sound quality.
When you plug the jack accessory in the jack, a popup asks you for the type of accessory:
• Headset
• Handsfree
• Loudspeaker
If another headset is already connected (USB or Bluetooth® if available), a popup asks you to select
your preferred headset.
A specific icon is displayed in the status bar: .
If necessary, you can also select the accessory type in the audio settings:
• or (long press) Audio
• Jack config.
• Headset / Handsfree / Loudspeaker Select the type of device plugged into the jack.
•
Your phone is equipped with a 3.5 mm, 4 pole jack. If your device is not compatible, you can use a 3
pole to 4 pole jack adapter.
: this icon is only available on the 8078s Premium DeskPhone.
7.20 Install a USB accessory (Headset, Handsfree, Loudspeaker)
• Connect the accessory to the USB connector.
• When you plug the accessory in the USB port, the USB accessory is automatically detected. If an
another accessory is already connected with the same function (USB, jack or Bluetooth® if
available), a popup asks you to select your preferred accessory to use for this function.
If necessary, you can also select the accessory type in the audio settings:
• or (long press) Audio
• Devices
• The list of connected devices is displayed.
• Select the type of device connected to the USB.
o Headset
o External hands-free
o External loudspeaker
•
If you are using a Bluetooth® headset provided with a Bluetooth® USB dongle, you can connect the
headset to the USB connector. Use and connectability depend on the vendor of the headset.
: this icon is only available on the 8078s Premium DeskPhone.
To Next Page
Loading...
