8212 DECT Handset
Maintenance Manual
8AL90334ENAAed01 17 /17
Test result
This show the result from the test all menu
Ex-factory default
This feature allows the user to clear all settings to default, including registration and brings the HS
to normal condition and initial state.
Valid inputs: Yes or No
If yes then the following screen will be shown and after a few seconds the phone restarts and is
back in Ex-factory mode
Note: There is no difference between default and master reset.
___
The information presented is subject to change without notice. ALE International assumes no
responsibility for inaccuracies contained herein. Copyright© ALE International 2016.
To Previous Page
Loading...
