8232 DECT Handset
Maintenance Manual
8AL 90305 USAA ed02 15 /16
Audio loopback test:
Test is the audio paths are working as expected. First the headset is test, then the speaker and finally
the earpiece. The user is expected to generate some inputs in the microphone of the HS and verify that
the input is outputted in the tested device.
Wideband test:
CAUTION: Do not use this test. Registration is lost after the tests.
Antenna test:
CAUTION: Do not use this test. Registration is lost after the tests
Provider test:
Reads the MMI provider and System provider EEprom fields and presents them to the user. Used to verify
that the HS is configured to the right customer.
To Next Page
Loading...
