8232 DECT Handset
Maintenance Manual
8AL 90305 USAA ed02 4 /16
2. Handset - Service Menu Management
This section describes how to use the feature “Service Menu” available only to vendors and developers
of the handset.
The document will also describe some options available in the Service Menu.
2.1 Service Menu
This menu is normally used to reveal features not used/seen by the end-user. By means of a special key
sequence a special service menu can be accessed. This service menu enables some special features like
Master reset, Site survey mode, Handset logs, Status, IPEI, Demo mode, Wideband and Test Tone.
To access the service menu, do as following step:
STEP 1 Click on Menu in idle mode > Type *7378423* (mnemonic: *SERVICE*) from the keypad to
display the Service Menu.
Note: at the end of the test mode, it is recommended to power off the handset and to power on it again
to restart properly the normal use.
2.2 Service Menu Parameter Definitions
The Service Menu is not for end users – only installers and suppliers.
Master Reset
This feature allows the administrator to clear all settings to default, including registration and brings
Handset to factory settings.
Valid inputs: Yes or No
Screen shots
To Next Page
Loading...
