Alcatel-Lucent 8262Ex - Getting Started; Installing the Battery in the Telephone

8262/8262Ex DECT Handset
8AL90323ENABed01
12 /63
2 Getting started
In order to have a fully operational 8262 DECT Handset, make sure that you have the following items: the
battery, the AC/DC adapter, the power supply and the USB cable.
Your phone is IP65 compliant but you must remember to firmly close all covers.
Never charge or install the battery in an ATEX (potentially explosive atmosphere) area.
2.1 Installing the battery in the telephone
2.1.1 Installing the battery in the telephone
1. 8262 DECT Handset
If the cover is in place on the phone:
 Unlock the cover.
 Lift up the cover.
Position the battery 'connectors ' side as shown in the drawing (A).
Terminate the installation of the battery in its compartment by pressing as
shown in the drawing (B).
If necessary lift up the belt clip to easily insert the battery.
Replace the cover.
Make sure that the lock is correctly positioned.
2. 8262Ex DECT Handset
The battery provided is integrated in the cover and is screwed onto the telephone.
If the battery is not fitted in the phone, place the battery correctly in its
compartment.
Secure the battery with the built-in screw using the screwdriver provided.
Make sure the battery is correctly screwed on.
A
A
B
B