Alcatel-Lucent 8262Ex - Characteristics of the Mains Power Adapter; Pull Cord; Presentation of the Battery Pack

8262/8262Ex DECT Handset
8AL90323ENABed01
61 /63
10.3 Characteristics of the mains power adapter
 Input: 100/240 V - 50/60 Hz.
 Output: 5V - 1A.
The mains power socket used must be close to the charger/holder and easily accessible, so that it can be
used as an 'on/off' facility.
10.4 Pull cord
A pull cord, adjustable length from 60 to 80 cm, can be fixed to the
handset. Remove the protected cover (side of the phone). Fix the pull
cord in the compartment by pressing strongly.
The pull cord can be used to trigger an alarm by a single wide movement
of the handset that will disengage the cord from the handset, thanks to a
sensor.
10.5 Presentation of the battery pack
10.5.1 Autonomy of your phone, without Bluetooth and noise reduction activated
On standby in the radio coverage zone.
Up to 160 hours.
In continuous conversation.
Up to 20 hours if economy mode is activated, 17
hours if economy mode is not activated.
10.5.2 Initial charge:
Place the telephone in the charging holder.
Battery icon flashing.
The battery is charged.
Maximum battery performance is only reached after around 10 charge/discharge cycles.
These batteries contain polluting substances: do not dispose of them in a dustbin - take them to a
specialized collection point.