Alcatel-Lucent 8262Ex - Page 64

Alcatel-Lucent 8262/8262Ex DECT Handset Quick guide
Related Documentation - Other languages for these Safety and Regulatory Instructions and User Documentation are available at the following Web site :
http://enterprise.alcatel-lucent.com?product=All&page=Directory. copyright © ALE International 2016 - 8AL90323xxABed01
 Answer the call.
 Long press (feature depending on the system): redial last
number or access the redial list.
 Switching between two calls (broker call).
 Switch on (long press).
 Switch off (long press).
 Switch off ringer.
 Hang up.
 Return to previous menu.
 Erase a character.
 Delete an entire field.
 Access menu.
 Access menu.
 Confirm.
 Navigate.
 Access to personal speed dial (down navigation key).
Your dect handset is marked with the atex logo: you can use it in an
atex (potentially explosive atmosphere) area.
 In idle or communication mode: access the company
directory.
 In communication mode: activate/deactivate the mute feature.
No feature is associated with this key in idle mode.
In idle mode
 Short press: access the ringer and vibrate adjustment feature.
 Long press: activate/deactivate vibrate feature (if the option is
enable in settings: vibrator shortcut).
 In communication mode: activate/deactivate the loudspeaker.
 Access the dtmf feature during a conversation (long press)
Led
 Green steady: the phone is on the charger and the battery is fully
charged.
 Red steady: the phone is on the charger and the battery is
charging.
 Slow yellow flashing: telephonic event such as unread message,
missed call, etc.
 Rapid yellow flashing: incoming call.
 Slow red flashing: out of coverage.
 Rapid red flashing: low battery warning.
 Slow blue flashing: bluetooth is activated.
 Flashing when the phone is plugged into the charger means the
same as when the phone is not plugged into the charger.
 3.5 mm jack plug for headset and maintenance (not available for the 8262ex dect
handset).
 Short press: decrease the volume of the ring tone during an incoming
call (8 steps) or decrease the volume of the earpiece or loudspeaker
during a conversation (8 steps).
 Long press: activate/deactivate the mute feature.
 Short press: increase the volume of the ring tone during an incoming
call (8 steps) or increase the volume of the earpiece or loudspeaker
during a conversation (8 steps).
 Long press: activate/deactivate the loudspeaker.
 Lock/unlock the phone
 Pull cord.
 Usb socket for charging the battery and upgrading the phone (not available for the
8262ex dect handset).
 Emergency calls (optional).
 Back to homepage.
 Programmable keys (f1 and f2 keys).
 Long press: activate/deactivate meeting mode (ascending ringing).
Back of
the set
 Clip to hook your phone on your belt.
 Access to the battery compartment
Charging your telephone battery
Never charge or install the battery in an ATEX (potentially explosive atmosphere) area.
How to dock your phone on the desk support
Put your phone on its support. Plug the USB cable into the 5V socket of the desktop charger. Plug
the other end of the USB cable into the AC/DC adaptor. Plug the AC/DC adaptor into the mains
power supply.
If you are using a dual charger, put your phone in the upper slot.
How to dock your phone with the USB cable (not available for the
8262EX DECT Handset).
Plug the USB cable into the USB port of your phone. The other end of the USB
cable can be plugged into the AC/DC adaptor or into a computer USB port.
You can also charge your phone from any USB plug, such as a computer USB plug. However, the
charging time is longer than charging with the AC/DC adapter.
LED
 In order to have a fully operational 8262 DECT Handset, make sure that you have the following
items: the battery, the AC/DC adapter, the power supply and the USB cable.
 Red steady: the phone is on the charger and the battery is charging
Charge the battery for about 3 hours before initial use.
Recharge your telephone battery regularly. The telephone can be on or off when recharging the
battery. If the telephone is to remain unused or out of its charger for several weeks, remove the
battery and store it separately.
The battery charging time is less than 3 hours. The charging time is longer if charging through the
USB plug from a device other than the AC/DC adapter.