Alcatel-Lucent 9363 - Page 17

NOTICE
Tools
Tools left in the working area can cause short circuits during operation which can lead to
the destruction of units.
Make sure after finishing your work that no tools, testing equipment, flashlights, etc.,
have been left in or on the equipment.
CAUTION
Hot-surface hazard
Touching a hot heater may cause burns.
Do not touch the heaters.
Before touching the units wait until they have cooled down, wear safety gloves and
clothes.
NOTICE
Corrosive-substance hazard
Cleaning plastic containers and lids with abrasive and aggressive cleaning agents may
cause permanent damage.
Do not use solvents, paraffin, abrasive or aggressive cleaning fluids, abrasive or
aggressive antiseptic agents or abrasive or aggressive materials.
NOTICE
Serv ice-disruption hazard
Cleaning with water or a high-pressure cleaner will damage the components in the
cabinet.
The washing down of the equipment or cabinet with water or a high-pressure cleaner is
not permitted.
WARNING
Fall hazard
Falls can occur when working at heights resulting in serious personal injury or death.
To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safe
work practices and wear appropriate fall protection equipment.
Safety statements Safety - specific hazards
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 9363 MC
401-387-097
Issue 1 May 2011
Alcatel-Lucent – Proprietary
Use pursuant to applicable agreements
1-7