This is used to make secure data transmission between the system and DECT mobiles by
using an authentication code during registration
: choice between "off" and "on".
If the authentication mechanism is "on", the following screen is displayed.
Each access code can have a maximum of ten digits. This can be limited to the first four digits
if there are DECT stations other than the 100/200 Mobiles.
6.1.1.12 USER INFORMATION LANGUAGE
Choice of language used on all the stations in the installation (display
and spoken help)
6.1.1.13 BASIC METERING UNIT COST
The value of the basic metering unit is introduced for calculating the cost of external calls. The
cost (not the duration) and the changes in the charge meters during calls are displayed. The
value entered can contain 5 figures (0-2 decimal places) in the chosen monetary unit. This
service is dependent on the subscription made with the operator.
*
6-13
To Next Page
Loading...
Need help?
General
