Need help?Do you have a question about the Alcatel-Lucent OS6560-P48X4 and is the answer not in the manual?
General| Model | OS6560-P48X4 |
|---|---|
| Product Type | Switch |
| Manageable | Yes |
| PoE | Yes |
| PoE Budget | 740 W |
| Jumbo Frame Support | Yes |
| Jumbo Frame Size | 9216 bytes |
| Input Voltage | 100-240 VAC |
| Storage Temperature | -40°C to 70°C |
| Relative Humidity | 5% to 95% non-condensing |
| Ports | 48 x 10/100/1000Base-T, 4 x 10G SFP+ |
| MAC Address Table Size | 32000 |
| Dimensions (W x D x H) | 440 x 420 x 44 mm |
| Operating Temperature | 0°C to 45°C |
| Dimensions | 17.32 in x 16.54 in x 1.73 in |
Step-by-step guide for physical installation of the switch hardware.
Specifies the electrical requirements for installing the switch.
Safety guidelines and recommendations to protect against electrical surges.
Procedures for unpacking and initial setup of the switch.
Procedure for the initial login using default credentials.
Steps to change the default administrator password for security.
Comprehensive specifications for various OmniSwitch 6560 chassis models.
Details on power supply types, installation, and redundancy features.
Diagrams and descriptions of the OS6560-P24Z8 front and rear panel components.
Specific guidelines for maintaining adequate airflow and cooling of the switch.
Steps for securing the chassis into a standard rack.
Details and specifications for the 300W AC PoE power supply.
Details and specifications for the 600W AC PoE power supply.
Details and specifications for the 920W AC PoE power supply.
General specifications for Alcatel-Lucent's Power over Ethernet support.
Default configuration parameters for Power over Ethernet settings.
Available PoE wattages based on installed power supplies.
How to view current PoE status and settings for ports.
How to enable or disable the priority disconnect feature for power management.
To Next Page