Alcatel 4400 - Free Key Programming

50
- Prog=3 : key programming (1), of personal directory (2), of melody (3), of
personal code (4), of associate number (5) and of forwarding
number (6).
- Lang=4 : select display language.
- Test=5 : test terminal display and sound.
To select the required function, dial the corresponding digit (e.g.: 1 for Consul=1).
To exit from programming,
PPrrooggrraammmmiinngg yyoouurr ppeerrssoonnaall ccooddee
The default code on your terminal is 0000.
To programme or modify your personal code:
(long press) then
and
Enter your old code followed by the new code twice (4 digits from 0 to 9, * and
#).
Each digit is shown by an *.
To confirm ,
CCaalllliinngg tthhee llaasstt nnuummbbeerr ddiiaalllleedd ((rreeddiiaall))
(long press): call is made automatically.
OK
4
GHI
3
DEF
0
OQZ
OFF