Alcatel 4400 - Page 76

74
- on navigator ð display
11:: SSYYSSTTEEMM NNUUMMBBEERR
- then ð display
SSUUBBSSCCRR.. ##55 OOKK??
- ð display
ssuubbssccrr.. RRuunnnniinngg
If after a short time (not more than two minutes) the registration was successful, the
radio field icon and the temporary
ssuubbsscc.. aacccceepptteedd
display appear on the screen.
Your 4074 terminal is then ready for operation in GAP mode with its new system.
If the registration attempt fails, or the
ssuubbsscc.. aacccceepptteedd
message is not obtained
within a few minutes, or the message
ssuubbsscc.. RReejjeecctteedd
, is displayed, switch off the
terminal.
(long press) and try again.
In the event of another failure, consult your approved supplier.
CCuussttoommiissiinngg yyoouurr tteerrmmiinnaall
When your terminal is on standby, you can customise some of the audio functions.
Give a long press on key
This gives a choice of five programming options. To select a programming option,
use and (for each function, the present status is indicated on the left of the
display).
- Activate/deactivate the ringer. To switch from one status to the other,
 · ringer activated
OK
C
OFF
OK
OK
6
MNO