EasyManua.ls Logo

Alcatel One Touch 890D - Internet Connectivity; GPRS;EDGE and Data Roaming; Wi-Fi Network Connection

Alcatel One Touch 890D
74 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
67 68
Getting connected
6
................
To connect to the internet with this phone, you can use GPRS/EDGE
networks or WI-FI, whichever is most convenient.
Connecting to the Internet6.1
GPRS/EDGE6.1.1
The first time you turn on your phone with SIM card inserted, it will
automatically configure network service: GPRS or EDGE.
To check the network connection you are using, press Menu key on
Home screen, then touch Settings\Wireless & networks\Mobile
networks\Network operators or Access Point Names. For dual
SIM model, touch either SIM1 or SIM2 on the above tabs to complete the
operation.
To create a new access point
A new GPRS/EDGE network connection can be added to your phone with
the following steps:
Press Menu key from Home screen.
Touch Settings\Wireless & networks\Mobile networks\Access
Point Names.
Then press Menu key again and the touch New APN.
Enter the required APN information.
When finished, press Menu key and touch Save.
To activate/deactivate Data roaming
When roaming, you can decide to connect/disconnect to a data service.
Press Menu key from Home screen.
Touch Settings\Wireless & networks\Mobile networks\Data
roaming.
For dual SIM model, touch either SIM1 or SIM2 on the above tabs to
complete the operation.
Mark/Unmark the checkbox to activate or deactivate data roaming.
When Data roaming is deactivated, you can still perform data exchange
with a Wi-Fi connection (refer to section 6.1.2 Wi-Fi).
Wi-Fi6.1.2
Using Wi-Fi, you can connect to the Internet when your phone is within
range of a wireless network. Wi-Fi can be used on phone even without a
SIM card inserted.
To turn Wi-Fi on and connect to a wireless network
Press Menu key from Home screen.
Touch Settings\Wireless & networks\Wi-Fi.
Mark/Unmark the checkbox to turn on/off Wi-Fi.
Touch Wi-Fi settings. The detailed information of detected Wi-Fi
networks is displayed in the Wi-Fi networks section.
Touch a Wi-Fi network to connect. If the network you selected is secured,
you are required to enter a password or other credentials (you may
contact network operator for details). When finished, touch Connect.

Table of Contents

Related product manuals