52 53
6
Getting connected ..................................
Your phone can connect to the Internet using either GPRS/EDGE/3G/4G or
Wi-Fi.
6.1 Connecting to the Internet
6.1.1
The first time you turn on your phone with your SIM card inserted, it will
automatically configure a mobile network service: GPRS, EDGE , 3G or 4G. If
the network is not connected, you can turn on mobile data in
usage.
To check the network connection you are using, touch the Application tab on
the Home screen, then go to Settings > More > Mobile networks > Access
or Network operators.
To create a new access point
A new mobile network connection can be added to your phone with the
following steps:
1 Touch
on the Quick settings bar to get to Settings.
2 Touch .
3 Then touch
to add new APN.
4 Enter the required APN information.
5 When finished, touch
and Save.
You can connect or disconnect to a data service according to your needs when
roaming:
1 Touch
on the Quick settings bar to get to Settings.
2 Touch , choose a roaming mode,
to disable it.
3. When data roaming is disabled, you can still perform data exchange with a
Wi-Fi connection (see ).
To set preferred network mode
1 Touch
on the Quick settings bar to get to Settings.
2 Touch .
3 Select as your preferred network mode.
6.1.2
You can connect to the Internet when your phone is within the range of a
wireless network. Wi-Fi can be used on your phone even without a SIM card
inserted.
1 Touch
on the Quick settings bar to get to Settings, then touch .
2. Touch the switch
to turn on/off Wi-Fi.
3. Turn on Wi-Fi: detailed information of all detected Wi-Fi networks is
displayed. in the Wi-Fi networks section.
4. Touch a Wi-Fi network to connect to it. If the network you selected is
secured, you'll need to enter a password or other credentials (contact
network operator for details). When finished, touch CONNECT.
To activate notification when a new network is detected
When Wi-Fi is on and the network notification is activated, the Wi-Fi icon will
appear on the status bar whenever the phone detects an available wireless
network within range. The following steps activate the notification function
when Wi-Fi is on:
1 Touch
on the Quick settings bar to get to Settings.
2. Touch Wi-Fi, then touch
and select Advanced.
3. Touch the Network notification switch
to activate/deactivate this function.
When Wi-Fi is on, you may add new Wi-Fi networks according to your
preference.
1 Touch
on the Quick settings bar to get to Settings.
2 Touch , then touch
and select Add network.
3. Enter the name of the network and any required network information.
4. Touch SAVE.
To Next Page
Loading...
