Alcor SENTINELplus - Proficiency Test

14
Proficiency Test
SENTINELplus ENTERAL FEEDING PUMP PROFICIENCY TEST
DATE:
NAME:
FACILITY:
CITY, STATE:
PART A: DEMONSTRATE THESE PUMP/ADMINSTRATION SET SETUP STEPS
TASK INITIAL
1. LOAD THE SET INTO THE PUMP AND PRIME THE LINE
2. SET THE INFUSION RATE AT 50ML/HOUR AND DOSE AT 450ML
3. VIEW TOTAL ACCUMULATED VOLUME THEN RESET PUMP TO 0
4. CHANGE INFUSION RATE TO 75ML/HR AND THE DOSE LIMIT TO 750ML
5. CLEAR THE VOLUME DELIVERED AND DOSE LIMIT, RESET INFUSION RATE TO 5
______
______
______
______
______
PART B: ANSWER THE BELOW QUESTIONS
1. Can a non-ALCOR SENTINELplus administration set be used with the SENTINELplus
enteral feeding pump?
________________________________________________________
2. What are 3 reasons that the OCC/EMP indicator might alarm?
________________________________________________________
3. What is the alarm that signals the dose limit has been reached?
________________________________________________________
4. What steps can you take to resolve an excess flow (FLO FASt) alarm?
________________________________________________________
5. Why are ENFit® connectors are used?
________________________________________________________
TRAINER/FACILITY MANAGER SIGNATURE
OF SUCCESSFUL COMPLETION:
PRINT NAME:
_____________________________________
_______________________
_____________________
___________________
__________
________________________________