MENU
C22
Off
On
3 kw
8. Unlocking the tool menu
It is possible to go from the setting menu to the tool menu. Under the tool menu you can access the other functions
of the control panel, described in section 9.
2. From the unlock menu, press
the tool symbol, and then OK or
MENU to unlock the tool menu.
3. The control panel in setting
menu with unlocked tool menu.
In order to get to the tool menu,
press the symbol.
1. The control panel in setting
menu. Press the unlock symbol.
MENU
C22
Off
On
3 kw
MENU
Lock
OK
MENU
C22
Off
On
3 kw
1. Start the gas operation by
pressing On (On is activated).
2. The settings are ready and
the boiler is working at set
temperature.
3. In order to switch off gas
operation, press Off.
7. Heating with gas
Do as follows to activate heating with gas. If both electricity and gas are selected, electricity is given priority.
MENU
C22
Off
On
3 kw
1. Start and step between the
various power steps (Off, 1kW,
2kW or 3kW) with the + button
or – button. The set value
is displayed on the screen.
Certain boilers only have 1kW
and 2kW.
2. The settings are ready and
the boiler is working at set
temperature.
3. To switch off the electrical
operation, step with the
– button to Off.
6. Heating with electricity
Do as follows to active heating with electricity. The greater the power, the better the heating performance.
In choosing between electricity and gas, electricity is given priority.
To Next Page
Loading...
Need help?
General
