AUS
1300 886 649
Storage
− Clean the pressure cooker and its accessories before storage (see chapter
“Cleaning and maintenance”).
− Store the pressure cooker in a clean dry place.
− To reduce wear and tear on the silicone sealing ring
4
, place the lid
3
upside
down or loosely on the pressure cooker for storage.
− Keep the pressure cooker away from children.
Troubleshooting
NOTICE!
Risk of damage!
Improper handling of the pressure cooker may result in damage.
− Do not open the housing of the pressure cooker; instead, have
qualified professionals perform any repairs. Contact a qualified
workshop for this. Liability and warranty claims are waived
in the event of repairs performed by the user or incorrect
operation.
Some problems may be caused by minor faults that you can fix yourself. To do so,
follow the instructions in the following table. If it is still not possible to resolve the
problem, contact customer service. Do not repair the pressure cooker yourself.
Problem Possible cause Solution
The lid
3
does
not close properly.
The silicone sealing
ring
4
is not fitted
correctly.
Reassemble the silicone sealing ring
correctly.
The lid cannot be
opened.
The pressure has not
been fully released.
Allow the pressure to release naturally,
or turn the pressure regulator
2
to
the “steam release” position.
The safety valve
1
has not dropped
down.
Use a cocktail stick to push it down,
jiggle the lid and allow the steam to
escape.
To Next Page
Loading...